PUBLIC Forums > Firearm Identification

Assistance in Identifying AK Pattern Receiver

(1/3) > >>

rwalker:
I recently encountered an AK pattern receiver with unfamiliar markings.  I am attaching an image of the markings showing the bottom of the receiver ahead of the magazine well.  I have my own thoughts but will withhold them pending review here.  The markings read "PCM WI NY".  The receiver was built up as a rifle using a Hungarian sourced AMD63/65 parts kit to complete the build.  There is an unusual small diameter hole near the top of the receiver above the trigger.  Any assistance would be greatly appreciated.

Eric Warren:
Norinco makes an AK-type rifle, model 84S.  "PCM WI NY" could be the importer, although I couldn't find any info on them.

classicfirearms sells the Hungarian AMD65 parts kit and has some nice pictures: http://www.classicfirearms.com/amd65rec

HTH

rwalker:
I considered the NORINCO/Poly Tech make, however the receiver is devoid of the atypical markings that are seen on either make.  Furthermore, there is no evidence that those markings may have been obscured or obliterated.  In addition, I have never seen such an import marked in that location by any importer.  I think the 84S model is a coincidence. 

Chris Monturo:
My Google-Foo came up empty using the info on the receiver.  So.....

Two things I can think of.

1) A person with an 07 manufacturing license made the firearm.  They are required to put their Company, City/State, model and Serial Number. 

2) An individual made the firearm for personal use.  While there is no requirement to mark the firearm, many individuals use industry requirements as a guide for marking them.  The PCM may be the guys initials.

Because the SN is 84S-0001, that tells me this is a one-of production. 

If you're really bored, you can go to the ATF web site and look up all firearm license holders.  Go through the state of NY and look for a business name with the initials PCM with an 07 type license and you may find your maker (if they are a licensed manufacturer).

Chris Monturo:
The crappy peeling paint is a good indicator it is a home made job.  Checking the quality of the riveting, spot welds for the receiver rails, heat treat of the fire control group holes, etc will help you decide if it a home made job or a production piece.

Navigation

[0] Message Index

[#] Next page