PUBLIC Forums => Public Forums => Forensics => Topic started by: Michael Haag on November 21, 2012, 09:14:54 AM
-
http://www.cnn.com/2012/11/20/tech/innovation/subsonic-bullets-wired/index.html?hpt=hp_c3 (http://www.cnn.com/2012/11/20/tech/innovation/subsonic-bullets-wired/index.html?hpt=hp_c3)
-
"Breaking the sound barrier also pretty much negates the use of a sound suppressor, or "silencer," which the special forces would likely want to use"
"Normally, a bullet expands -- or obturates -- to the size of its barrel after being fired"
Wow.
-
I reference these polymer cased cartridges and its continued development in my book, there some different approaches from different "players" out there.
Walker.
-
I second your "Wow" Dan,
However, I met these folks at the SHOT show last year.
http://www.pcpammo.com/index.htm (http://www.pcpammo.com/index.htm)
-
For those who have CartWinPro:
Check for "5.56 Synthetic" in the calibre database and follow the relation link to the cartridge.
You can find the data and pictures of the 5.56 SCF Steyr
With 4855 fps this is the last cartridge/ firearm I would try to put a silencer on :)
Axel
-
Ok, Lets look at this from a differant perspective. In order to be relativly silent the velocity must be kept to a minumum, lets say 950 fps. In order to get the desired results you must increase the weight of the bullet and at the same time maintain stability. In order to maintain stability we need a projectile that is perfectly balanced at any rpm. In other words your bullet must resemble in some way the configuration of a football. An object that will fly with rotational stability at a variety of velocities. Imbalance is the culprit...HW
-
Another approach is to use a bullet that's front heavy--I believe a forward center of gravity will enhance stability as well.
-
In the case of say the 7.62x51mm. If one was to seat a 168gr. MatchKing backwards with the base forward and the hollowpoint to the rear the same result would be had, I would think...HW
-
Winteh
Wouldn't the heaver bullet be longer and require a faster twist rate?
-
If you turn some bullets around and seat them base forward it defnitely improve penetration. Years ago we did the experiment with 150 grain 7.62 x 51mm Nato FMJ ammunition. If you shoot at a falling plate (12" x 12" steel about 1/2" thick) the bullet will knock the plate over and mak a small indentation - if you turn the bullet around it will "punch" a neat round hole throug the steel plate.
-
Maybe we should invent wad cutters for rifle cartridges?
-
Too late, already invented by Dynamit Nobel/RUAG! :-0
Short range practise ammo in .50 BMG
See collection record M3006 in CartWinPro
Axel
(http://www.cartwinpro.com)