PUBLIC Forums => Public Forums => Topic started by: Leanna Kim on March 06, 2018, 12:49:02 PM

Title: Lorcin LH380 Disassembly Help
Post by: Leanna Kim on March 06, 2018, 12:49:02 PM
Hello,

I am a firearms examiner at Long Beach PD and received a Lorcin LH380 as evidence. I can't find any references on how to remove the slide from the frame or a schematic for this model. It is missing various parts as well. This model does not field strip like your typical Lorcin L380. It also has a grip safety and an additional take down button below the firing pin guide, see attached photo. Any help would be greatly appreciated!

Thank you!
- Leanna
Title: Re: Lorcin LH380 Disassembly Help
Post by: Steve Scott on March 06, 2018, 01:11:27 PM
Press in on the rectangular button, pull back and up on the slide at the same time.  Should lift right off.
Title: Re: Lorcin LH380 Disassembly Help
Post by: Charles Clow on March 06, 2018, 01:16:59 PM
Similar to the L9MM

https://www.youtube.com/watch?v=zZ4fwD-SLag (https://www.youtube.com/watch?v=zZ4fwD-SLag)

Make sure you are wearing safety glasses.  :police:

CMC
Title: Re: Lorcin LH380 Disassembly Help
Post by: Leanna Kim on March 06, 2018, 01:31:20 PM
Thank you!
I tried this yesterday but must have been doing something wrong...
Title: Re: Lorcin LH380 Disassembly Help
Post by: Steve Scott on March 06, 2018, 04:05:12 PM
Yes, safety glasses.  That spring from the firing pin can end up far, far away...and travels at a high velocity!!
SimplePortal 2.3.5 © 2008-2012, SimplePortal