PUBLIC Forums => Public Forums => Headstamp Submissions => Topic started by: drmarkwg on February 20, 2010, 07:58:17 PM

Title: 5.56x28 or 5.7x28?
Post by: drmarkwg on February 20, 2010, 07:58:17 PM
I came across this case today. Neck is crimped for blank round. Headstamp has MAL 5.56 3-'83 but the only info I have found which closely approximates this case is he 5.7 x 28. Same thing? Thanks
Title: Re: 5.56x28 or 5.7x28?
Post by: curtito on February 21, 2010, 01:58:37 PM
This is a 5.56mm Military blank made by
Syariakai Malaysia Explosives Ltd., Batu-Arang, Malaysia.
It is shorter as it is blank used for training.
Title: Re: 5.56x28 or 5.7x28? Correction needed!!
Post by: DocAV on July 14, 2010, 10:27:31 PM
CORRECTION:
 THis is a 9x19 Parabellum Blank made by reforming a MAL 5,56 case and trimming before filling and crimping. Probably Movie Blank origin.

A very common method of making Movie-use 9mm Pistol and SMG blanks.

It may have also been done in Malaysia, by SMOE, but unlikely ( they make New 9mm Blanks, to proper 9mm Specs...Blanks made from .223/5,56 cases are about 0.010 " undersized at the head and rim, compared to new, factory made 9mm Blanks.

Regards,
Doc AV
AV Ballistics Forensic Services
AV Ballistics Film Ordnance Services
Brisbane Australia
Title: Re: 5.56x28 or 5.7x28?
Post by: drmarkwg on July 15, 2010, 08:33:04 PM
Many Thanks DOC!
SimplePortal 2.3.5 © 2008-2012, SimplePortal