collapse collapse

* Links

* Forum Menu

* User Info

 
 
Welcome, Guest. Please login or register.

* Who's Online

  • Dot Guests: 446
  • Dot Hidden: 0
  • Dot Users: 2
  • Dot Users Online:

* Board Stats

  • stats Total Members: 2424
  • stats Total Posts: 88439
  • stats Total Topics: 15113
  • stats Total Categories: 5
  • stats Total Boards: 63
  • stats Most Online: 721

* Search



Author Topic: Casting Materials  (Read 24859 times)

0 Members and 2 Guests are viewing this topic.

Offline BT_VOL

  • AFTE Friend
  • Posts: 2
Casting Materials
« on: July 27, 2009, 06:26:24 AM »
Hi, I'm doing some research into the different types of casting materials used for casting and re-casting tools and scene marks. Currently using Isomark for the majority, also Permlastic and Silcoset. Anybody use anything different?
Looking to reproduce high levels of detail with a rapid cure-time.
Many thanks

BT-VOL

Offline Ray Cooper

  • Past President
  • *****
  • Posts: 706
  • Gender: Male
Re: Casting Materials
« Reply #1 on: July 27, 2009, 06:38:28 AM »
We have used Mikrosil for quiet a number of years and have had good success with it.

Ray
Ray Cooper
834 Cooper Rd.
Dubach, LA.  71235
rballistic@gmail.com

Offline Bob Hart

  • AFTE Member
  • ***
  • Posts: 176
Re: Casting Materials
« Reply #2 on: July 27, 2009, 07:21:43 AM »
I have had very good results with a product called Coe-Flex (Coe Laboratories).  It is less reflective than Mikrosil and has the advantage of being available locally at dental supply companies.  It is a polysulfide offered in different consistencies. We used injectible, the thinnest.  You may be able to find it or a comparable product locally.

Offline BT_VOL

  • AFTE Friend
  • Posts: 2
Re: Casting Materials
« Reply #3 on: July 27, 2009, 07:38:02 AM »
Many thanks for the replies, we have also used Mikrosil with good results, although I have not heard of CoeFlex. I'm in the UK so will have a look at the availability of similar dental materials here.

Offline Travis Spinder

  • Past President
  • *****
  • Posts: 943
  • Gender: Male
Re: Casting Materials
« Reply #4 on: July 27, 2009, 08:12:08 AM »
Forensic Sil from Forensic Source would be my vote.  It is much like mikrosil but the mixing and application is 1000X better.
 
http://www.forensicssource.com/p-1452-forensic-sil.aspx

Offline Scott Doyle

  • AFTE Member
  • ***
  • Posts: 1929
  • Gender: Male
    • An Introduction to Forensic Firearms Identification
Re: Casting Materials
« Reply #5 on: July 27, 2009, 08:39:55 AM »
I'm with Travis.  Forensic-Sil is the only way to go!  May be a little higher in price than some (maybe not as I don't know what the others cost) but you will get you money back two-fold in time saved. 

No clean up involved and no waste!  Can be easily applied without getting it all over everything (unlike Mikrosil  :) ).

Quality of the cast striae is on par with Mikrosil.

Offline Frans Maritz

  • AFTE Member
  • ***
  • Posts: 89
  • Gender: Male
Re: Casting Materials
« Reply #6 on: July 27, 2009, 08:51:53 AM »
We use AccuTrans, similar to Forensic-Sil, excellent product:

http://accutransusa.com/site/
Frans A. Maritz
FA/TM Examiner
State of SD Forensic Laboratory
Division of Criminal Investigation

Jerryp

  • Guest
Re: Casting Materials
« Reply #7 on: July 31, 2009, 10:24:15 PM »
we use both Forensic Sil and Mikrosil

I like forensic  sil better. it is so much easier to use.   however, it's a good idea to:

A) remain proficient with mikrosil ( make the trainee's use mikrosil before forensic sil)

B) Keep some mikrosil on hand for thse times when you are in the middle of a case and you run out of applicator tips!!

 

Countdown Clock

* Recent Posts

* Headstamp Guide

SimplePortal 2.3.5 © 2008-2012, SimplePortal