collapse collapse

* Links

* Forum Menu

* User Info

 
 
Welcome, Guest. Please login or register.

* Who's Online

* Board Stats

  • stats Total Members: 2373
  • stats Total Posts: 86090
  • stats Total Topics: 14745
  • stats Total Categories: 5
  • stats Total Boards: 63
  • stats Most Online: 721

* Search



Author Topic: GRC question  (Read 10816 times)

0 Members and 1 Guest are viewing this topic.

Offline Brian Rothfuss

  • AFTE Member
  • ***
  • Posts: 7
GRC question
« on: January 14, 2010, 03:19:21 PM »
Afternoon,

I recently received a 45 caliber bullet jacket with six lands and grooves inclined to the left with approximate land impressions of 0.135” and groove impressions of 0.091”.  The FBI 2008 GRC list shows nothing within that range, and I was hoping someone might have seen this before and could help.

I appreciate any assistance in this matter,

Brian Rothfuss
Forensic Scientist
Virginia Department of Forensic Science
700 N 5th St.
Richmond VA. 23219
(804) 786-4707 ext 22310

Offline Bill Moore

  • AFTE Member
  • ***
  • Posts: 112
  • Gender: Male
Re: GRC question
« Reply #1 on: January 15, 2010, 07:49:26 AM »
Brian,

In carpentry, the rule is to measure twice and cut once.  I do not doubt you did the equivalent but your values come up with something between a .41 caliber and a .44 caliber bullet.

If you use 0.091" as the limp value and 0.135" as the gimp value then you get a .44 Magnum Sauer & Sohn model Western Marshall revolver in the GRC list.

If that doesn't answer your question then I suggest that you recalibrate your measuring equipment.

Good luck,
Bill
William L. Moore
Moore Forensics
829 West Palmdale Boulevard, #87
Palmdale, CA  93551
mooreforensics@att.net
(661) 816-5176

 

Countdown Clock

* Recent Posts

* Headstamp Guide

SimplePortal 2.3.5 © 2008-2012, SimplePortal