collapse collapse

* Links

* Forum Menu

* User Info

 
 
Welcome, Guest. Please login or register.

* Who's Online

  • Dot Guests: 79
  • Dot Hidden: 0
  • Dot Users: 3
  • Dot Users Online:

* Board Stats

  • stats Total Members: 2373
  • stats Total Posts: 86089
  • stats Total Topics: 14745
  • stats Total Categories: 5
  • stats Total Boards: 63
  • stats Most Online: 721

* Search



Author Topic: Shooting Gloves for test firing  (Read 12303 times)

0 Members and 1 Guest are viewing this topic.

Offline Skip Richardson

  • Amateur Stamp Collector
  • AFTE Member
  • ***
  • Posts: 158
Shooting Gloves for test firing
« on: October 30, 2013, 12:51:46 PM »
Hi all,
 
I wanted to ask what your sections are using for shooting gloves.  I noticed a couple of bulged cases in a .40S&W pistol I test fired this morning and got spooked.  I figured the double-feed malfunctions in the last two rounds fired were either due to an extractor failure or a chamber out of specification, and a visual inspection of the cartridge cases supported the latter.
 
I've done a little bit of research but most of what I'm finding are combat and competition gloves.  I normally wear gloves when I compete, but they're to keep sweat off of my guns and to prevent my guns from cutting me up...I'm looking for something to [better] protect my hands in case one of my guns at work decides to go kaboom...
 
Please give any insight you might have!!  Thanks in advance!
 
Note: The firearm I was test firing was not one that I would typically associate with questionable stability...but I acknowledge that I'm wet behind the ears  ;)
 

Offline Evan Thompson

  • AFTE Member
  • ***
  • Posts: 1709
  • Gender: Male
  • retired
Re: Shooting Gloves for test firing
« Reply #1 on: October 30, 2013, 12:59:41 PM »
http://www.fullsource.com/memphis-9178nf/?size=2&gclid=cpmnnvcdv7ocfsu6qgodu2maxg
One possible $11.00 dollar solution, and they come law enforcement black! 
 
Evan Thompson
-----------------------------------
Never live a life gray
928-607-6123

Offline Laura Draga

  • AFTE Member
  • ***
  • Posts: 293
Re: Shooting Gloves for test firing
« Reply #2 on: October 30, 2013, 02:54:20 PM »
Was the FA in question a Sigma?
 
As for the gloves, we use Kevlar when we have doubts (usually revolvers). Do a search for "cut resistant" gloves, and you should gind a good variety.

Offline Skip Richardson

  • Amateur Stamp Collector
  • AFTE Member
  • ***
  • Posts: 158
Re: Shooting Gloves for test firing
« Reply #3 on: October 30, 2013, 03:48:02 PM »
The firearm was indeed a SW40VE.  I looked up recalls for the sigma series and only found the failure to fire bulletin.

Offline Laura Draga

  • AFTE Member
  • ***
  • Posts: 293
Re: Shooting Gloves for test firing
« Reply #4 on: October 30, 2013, 04:21:13 PM »
http://www.afte.org/forum/smf1/index.php?topic=8426.msg50270#msg50270
has some photos I took of a SD40VE chamber cast and fired test. I never did get back with S&W about it. Google "bulged cases" and you will find quite a few owners complaining. Interesting that it was the SW, not SD model. All of the complaints I saw centered around the SD.
 
On another note,I just noticed the mis-spelling in my previous post. Hopefully it will be easy for you to "find" a variety of gloves to suit your needs.

 

Countdown Clock

* Recent Posts

* Headstamp Guide

SimplePortal 2.3.5 © 2008-2012, SimplePortal