PUBLIC Forums => Public Forums => Topic started by: Leanna Kim on March 06, 2018, 12:49:02 PM
-
Hello,
I am a firearms examiner at Long Beach PD and received a Lorcin LH380 as evidence. I can't find any references on how to remove the slide from the frame or a schematic for this model. It is missing various parts as well. This model does not field strip like your typical Lorcin L380. It also has a grip safety and an additional take down button below the firing pin guide, see attached photo. Any help would be greatly appreciated!
Thank you!
- Leanna
-
Press in on the rectangular button, pull back and up on the slide at the same time. Should lift right off.
-
Similar to the L9MM
https://www.youtube.com/watch?v=zZ4fwD-SLag (https://www.youtube.com/watch?v=zZ4fwD-SLag)
Make sure you are wearing safety glasses. :police:
CMC
-
Thank you!
I tried this yesterday but must have been doing something wrong...
-
Yes, safety glasses. That spring from the firing pin can end up far, far away...and travels at a high velocity!!