PUBLIC Forums => Public Forums => Technical Assistance => Topic started by: jglass on March 01, 2005, 01:27:16 PM

Title: need assistance
Post by: jglass on March 01, 2005, 01:27:16 PM

I would like to know a website or any other source where I can find out the twist direction for rifling in Baretta 9mm's.  

I checked a Baretta website but this information was not included.  Thanks.

Title: need assistance
Post by: Scott Doyle on March 01, 2005, 03:47:01 PM

All Beretta 9mm pistols have 6/right rifled barrels.

Title: need assistance
Post by: Jim Roberts on March 02, 2005, 05:11:09 PM

Scott,

Your program kicks out a couple or 3 92FS with left twist barrels, but I'd bet on those being after market bbls or something.  I've never seen anything but right twist Berettas.

Jim

Title: need assistance
Post by: Scott Doyle on March 02, 2005, 06:38:05 PM

Jim,

Yeah you are right.  I missed those.  I'm with you in thinking that these probably were fitted with replacement barrels but something else may be at work.

Anyone know of a 6/Left rifled Berretta?

Title: need assistance
Post by: Ann Davis on March 03, 2005, 09:32:28 PM

Scott,

Did you input those entries into the database or were they imported?  We have found some apparent errors in the twist in some GRC entries, so there may be an error with a 6L Beretta pistol.   We see 6R Beretta pistols.

Title: need assistance
Post by: Scott Doyle on March 03, 2005, 09:47:56 PM

Ann,

No I didn't add those.  The 6/L Berettas are from the FBI data and are after-market barrels.  

If you look through the GRC data you will find a lot of questionable entries.

Title: Beretta Trigger Pull
Post by: Pete Striupaitis on April 19, 2005, 11:41:45 AM

I'm looking for factory spec trigger pulls for a Beretta 92F in single and double action...I know we have our databse...but does anyone have a Beretta spec or POC at Beretta?

Title: Beretta Trigger pulls
Post by: Joe Thibault on April 22, 2005, 10:47:10 AM

Hey Pete. The Beretta Armorer's manual has a table of various models and their associated trigger pulls from the factory. I used Ms. Fleming's manual. Give me a call and I can pass her number on to you