Lorcin LH380 Disassembly Help

[Leanna Kim]

Hello,

I am a firearms examiner at Long Beach PD and received a Lorcin LH380 as evidence. I can't find any references on how to remove the slide from the frame or a schematic for this model. It is missing various parts as well. This model does not field strip like your typical Lorcin L380. It also has a grip safety and an additional take down button below the firing pin guide, see attached photo. Any help would be greatly appreciated!

Thank you!
- Leanna

[Steve Scott]

Press in on the rectangular button, pull back and up on the slide at the same time.  Should lift right off.

[Charles Clow]

Similar to the L9MM

https://www.youtube.com/watch?v=zZ4fwD-SLag

Make sure you are wearing safety glasses. 

CMC

[Leanna Kim]

Thank you!
I tried this yesterday but must have been doing something wrong...

[Steve Scott]

Yes, safety glasses.  That spring from the firing pin can end up far, far away...and travels at a high velocity!!