collapse collapse

* Links

* Forum Menu

* User Info

 
 
Welcome, Guest. Please login or register.

* Who's Online

  • Dot Guests: 402
  • Dot Hidden: 0
  • Dot Users: 0

There aren't any users online.

* Board Stats

  • stats Total Members: 2421
  • stats Total Posts: 88249
  • stats Total Topics: 15080
  • stats Total Categories: 5
  • stats Total Boards: 63
  • stats Most Online: 721

* Search



Author Topic: metal wipes/smear on bone surface  (Read 19844 times)

0 Members and 1 Guest are viewing this topic.

Offline jrathman

  • AFTE Friend
  • Posts: 2
  • Gender: Male
metal wipes/smear on bone surface
« on: January 13, 2010, 02:15:19 PM »
Greetings, I am a student in the Master of Forensic Science program at Nebraska Wesleyan University and am working on research that applies forensic toolmark examination to an archaeological situation.  I'm attempting to identify the tool type on ancient butchered remains (cut marks on bone).

One idea that came to mind during my research is to attempt identify metal within the cut mark (metal wipes or smear).  Has anyone experimented or know research on identifying metal elements in order to associate/link a tool used on a bone surface?  I have read about bullet wipes/smears but wondering if research has been done on bone surfaces.

Thanks,

Jeff Rathman

Offline Mike Scanlan

  • AFTE Member
  • ***
  • Posts: 53
Re: metal wipes/smear on bone surface
« Reply #1 on: January 13, 2010, 05:03:08 PM »
I use x-ray fluorescence spectrometry (XRF) mapping to analyze bones for bullet impact.  Copper/zinc (from bullet jackets) and lead are readily identifiable.  Iron will show up from blood/tissue on the bone, so might be more problematic for interpretation.
Mike Scanlan
USFW National Forensics Lab, Ashland,OR
541-482-4191       mike_scanlan@fws.gov

Offline Ron Fazio

  • AFTE Friend
  • Posts: 5
  • Gender: Male
Re: metal wipes/smear on bone surface
« Reply #2 on: February 17, 2010, 11:02:32 AM »
You can submit sub-samples of the cut surface and sub-samples of the non-cut areas for ICP (or ICP-MS) testing. Its fairly cheap (most environmental labs have this instrumentation) and requires only a very small sample.

You can compare the identified metals on the cut surface and non-cut surface to determine tool metal. There may be matrix interference issues do to the likely high levels of calcium, so you may want to check with the lab first.

It is a destructive test.

Offline Rachel B-K

  • AFTE Member
  • ***
  • Posts: 31
  • Gender: Female
Re: metal wipes/smear on bone surface
« Reply #3 on: February 18, 2010, 05:44:23 AM »
Hi Jeff,

I am not sure whether this would work on your samples, or if you have access to the equipment, but thought I would raise the idea.

If you could pick up the metal residues or particulates from the bone with a small sticky stub, you could put the stub into and analyse them with a surface analysis method called SIMS (Secondary Ion Mass Spectrometry). I have used this technique to identify batches of metal components successfully with just a timy amount of material created with sandpaper. This website will give you the basic principle from a lab in the UK:

http://www.lpdlabservices.co.uk/analytical_techniques/surface_analysis/sims/index.php

This does not completely destroy the particles like ICP, but will remove the surface layer from the analysed particles.

Rachel

 

Countdown Clock

* Recent Posts

* Headstamp Guide

SimplePortal 2.3.5 © 2008-2012, SimplePortal